JETCOAT All Weather Roof Patch 10oz Tube

JETCOAT All Weather Roof Patch 10oz Tube

A thick blend of liquid asphalt and non-asbestos fibers specially designed as an adhesive, general utility sealing compound that imparts water-repellency to flashings, seams, or patches in roofs and gutters. The specially treated asphalt cement is excellent for all roof repair work on both wet and dry surfaces.

• Use on Wet or Dry Surfaces
• Seals Leaks, Even in Rain
• Trowel Grade
• Dries Black

Uses –
• Splits & Seams
• Flashings
• Vents
• Skylights
• Metal Joints
• Chimneys
• Coping

Application –
Clean surface with brush or broom, removing all loose sediment and dirt. Nail down any loose parts. Apply material with a mason’s trowel to about 1/8” thick, smoothing down all edges. Mend large cracks, breaks, or loose seams by applying cement to defective area. Extend cement to three inches beyond area to be repaired. Spot stick Reinforcing Fabric repair material in position over entire area and apply an additional layer of cement. Leaks around vent pipes, spouts, valleys, skylights, chimneys and flashings can be made weather tight by applying JETCOAT All-Weather Roof Patch. Clean tools with mineral spirits or kerosene in a well ventilated area immediately after use.

Coverage: (Approx.)
Approximately 12 square feet per gallon at 1/8 inch thick
Approximately 3 square feet per quart at 1/8 inch thick
One 10 ounce tube will fill approximately 17 lineal feet at 3/8 inch thick