DeWalt 185,000 BTU/HR Forced Air Kerosene Construction Heater

The DXH185KT thermostatically controlled forced air kerosene heater burns at 185,000 BTU/HR and can be used with kerosene diesel, fuel oil or JP-8 fuels. With a included wheel kit and an 13.8 gallon tank you will get a full 10 hours of run time and the ability to heat up to approximately 4625 square feet of space. 

Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temperature.

• 10″ Flat free tires for long lasting maintenance free use.
• Time saving assembly, no need to keep track of nuts and bolts when reassembling each season, assembles in minutes.
• Recessed controls designed to reduce the risk of having the knobs or valves damaged on the jobsite.
• Continuous electronic ignition is always present as a source of ignition for unburned fuel, reducing the ability for fuels to pool and collect in a dangerous manner
• Fuel consumption: 1.37 gal/hr.
• Fuel tank capacity: 13.4 gal.
• Full tank run time: 9.8 hrs.
• Heater type kerosene: heating area 4,700 sq.ft.
• Output (btu/hr): 185,000 btu/hr.
• Output (cfm): 400 cfm
• Power requirements: 120v 60hz
• Weight when full: 118 lbs.
• Wheels: 10″ flat free